NCC battery for iPhone 14 3279mAh with option to be assigned as USED

The Diagnosable-type battery for iPhone is a modern alternative that completely eliminates complex processes such as soldering, transferring the BMS, spot welding or battery programming. Using a plug and play mechanism, you simply place the new battery in the casing and carry out a short pairing procedure in diagnostic mode. The device's operating system will accept the component as an authentic or used part, so no notifications about an unidentified component will appear on the screen.

Battery pairing instructions Prerequisites: iOS 18 or later and a stable internet connection.

Quick setup procedure in seven steps: 1. Once the battery has been physically installed in the phone, the system will detect it automatically. 2. Open the Settings menu, select the General tab, then About, and go to the Parts and Service History section. 3. Tap the notification about the new battery and confirm your choice with Continue. 4. Connect to a Wi-Fi network and follow the instructions that appear on the screen. 5. Confirm acceptance of the terms and conditions, which will cause the system to treat the cell as original. 6. Restart the device once the entire process is complete. 7. Check the battery health in the Settings menu by selecting Battery, then Battery Health.

If the standard setup method fails: - Switch the phone off completely. - Press and hold both volume buttons at the same time, i.e. the volume up and volume down buttons. - Connect the charger cable without releasing pressure on the volume buttons. - Release the buttons when the manufacturer's logo appears on the display. - Follow the diagnostic messages shown on the screen.

Important operating notes The component remains fully compatible with iOS versions from iOS 18 to iOS 26, provided that stable, official software releases supplied by Apple are installed. Pairing stability is not guaranteed when using beta test software. Any changes introduced in future system updates may affect the component recognition process, which the distributor and the cell manufacturer have no influence over, and they do not guarantee that the pairing function will work on those systems.