Kidde carbon monoxide detector with display K7DCO

Name: Kidde carbon monoxide detector with display K7DCO
Brand: Kidde
SKU: GSG-134830

SKU GSG-134830 · EAN 0047871313402

VAT invoice in your customer account

Online warranty claims

Carbon monoxide alarm with display K7DCO featuring an Kidde electrochemical sensor, guaranteeing a 10-year operating life. Battery power allows the detector to be mounted in the optimal place in the room and also provides protection in the event of a mains power failure.

The built-in LCD display shows the carbon monoxide concentration level in the range from 0 to 999 PPM. CO concentration is measured every second. Exceeding the permitted CO level is signalled visually (red LED) and audibly (loud, pulsing alarm sound at 85dB).

The detector has a test/reset button for checking the device's operation and resetting the alarm signal, as well as a button which, when pressed, displays the highest CO level recorded in the sensor's memory. The detector also features a function informing you of alarm activation within the last 14 days. This allows the user to make sure that no carbon monoxide was released in the room during their absence.

The self-check system continuously monitors, among other things, the sensor, internal circuits and battery status. In the event of malfunction or low battery level, the yellow LED flashes, appropriate graphic information is shown on the LCD panel and a warning sound is activated. Additionally, the detector is equipped with a simulated test function allowing quick verification of the sensor's correct response to CO test gas.

Thanks to its special shock-resistant design, the detector is approved for use not only in houses and flats but also in caravans, motorhomes and on boats. After 10 years from power activation, the detector will remind you to replace the device.

K7DCO is marked with the B building mark, confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021 for domestic carbon monoxide detectors. Tests were carried out by the Scientific and Research Centre for Fire Protection – National Research Institute named after Józef Tuliszkowski (CNBOP-PIB). It also holds a BSI certificate confirming compliance with BS EN 50291-1:2018, issued by the British Standards Institution.

Additionally, the detector K7DCO holds a certificate confirming compliance with BS EN 50291-2:2019 (PN-EN 50291-2:2020) and approving the device for use in motorhomes and boats. Compliance with the above standard was confirmed by the independent testing body British Standards Institution.

BENEFITS

Electrochemical technology – one of the most precise electrochemical sensors in the world

LCD display with a maximum reading of 999 PPM

40% longer operating life compared with other detectors available on the market

Loud alarm signal

Test/Reset button – for checking and operating the device

Peak level button – for reading the highest recorded CO level stored in memory

Battery power providing protection also during mains power failure

Can be wall-mounted, ceiling-mounted or placed on a flat surface

Signalling of malfunction and end of service life

Low battery voltage signalling

Additional LED signalling malfunction and end of operating life