Kidde carbon monoxide detector K7CO

Carbon monoxide detector K7CO equipped with a Kidde electrochemical sensor, guaranteeing a 10-year operating life. Battery power allows the detector to be installed in an optimal place in the room and provides protection even in the event of a mains power failure.

Exceeding the permissible CO level is signalled visually (red LED) and audibly (loud, pulsating alarm with a volume of 85dB). Information about detection of a CO concentration exceeding 100 PPM is recorded in the device's memory. This allows the user to check whether carbon monoxide was emitted while they were absent from the room. The detector has a test / reset button for checking the device's operation and resetting the alarm signal.

The system monitors on an ongoing basis, among other things, the sensor, internal circuits and battery status. In the event of incorrect operation or low battery charge, a yellow LED flashes and a warning audible signal is activated. In addition, the detector is equipped with a function enabling quick verification that the sensor responds correctly to CO test gas.

Thanks to its special shock-resistant design, the detector is approved for use not only in homes and flats, but also in caravans, motorhomes and boats. After 10 years from activation, the detector will remind you that the unit needs replacing.

K7CO is marked with the B construction mark, confirming compliance with the requirements of the Polish standard PN-EN 50291-1:2018+AC:2021 for domestic carbon monoxide detectors. Tests were carried out by the Central Institute for Labour Protection – National Research Institute (CNBOP-PIB). In addition, it holds a BSI certificate confirming compliance with the requirements of the BS EN 50291-1:2018 standard, issued by the British Standards Institution.

Additionally, the K7CO detector holds a certificate confirming compliance with the requirements of BS EN 50291-2:2019 (PN-EN 50291-2:2020), approving the device for use in caravans and boats. Compliance with this standard has been confirmed by the independent testing body British Standards Institution.

BENEFITS

Electrochemical technology – one of the most precise electrochemical sensors in the world

40% longer operating life compared with other detectors available on the market

Loud alarm signal

Test/Reset button for control and operation of the device

Battery power ensuring protection even during a mains power failure

Option of wall or ceiling mounting, or placing the detector on a flat surface

Signalling of incorrect operation and end of operating life

Low battery voltage signalling

Additional LED signalling incorrect operation and end of service life

Function informing of alarm activation within the last 14 days

Simple installation and operation

Certificate approving use in homes and in caravans, motorhomes and boats

Compact dimensions, low weight, attractive and durable housing

Very low operating costs

B construction mark

National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021

CNBOP-PIB certificate confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021

BSI certificate confirming compliance with the BS EN 50291-1:2018 standard

BSI certificate confirming compliance with the BS EN 50291-2:2019 standard

10-year warranty