Kidde carbon monoxide detector 2030-DCR

The 2030-DCR carbon monoxide detector is equipped with a Kidde electrochemical sensor, guaranteeing an operating life of up to 10 years. Battery power allows the detector to be installed in the optimal location in the room and provides protection even in the event of a mains power failure.

Exceeding the permissible CO level is signalled visually (red LED) and acoustically (a loud, pulsating alarm sound at 85dB). The device memory records information about CO concentration exceeding 100 PPM. This allows the user to check whether carbon monoxide was released into the room while they were absent. The detector has a Test/Reset button that allows you to check the operation of the device and reset the alarm signal.

The monitoring system continuously checks, among other things, the sensor, internal circuits and battery status. In the event of a malfunction or low battery charge, a yellow LED flashes and a warning sound is activated.

Thanks to its specially designed housing, the detector can be mounted on a wall or placed on a flat surface, e.g. on a bedside table near the bed. After 10 years from activation of the power supply, the detector will remind you that the device needs to be replaced.

2030-DCR is marked with the B construction mark, confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021 for domestic carbon monoxide detectors. Testing was carried out by the Central Institute for Fire Protection – National Research Institute (CNBOP-PIB) named after Józef Tuliszkowski. It also holds a TÜV Rheinland certificate confirming compliance with the standard BS EN 50291-1:2018.

FEATURES

Electrochemical technology – one of the most precise electrochemical sensors in the world

40% longer operating life compared with other detectors available on the market

Loud alarm signal

Test/Reset button – for checking and operating the device

Battery power providing protection even during a mains power failure

Can be mounted on a wall or ceiling, or placed on a flat surface

Signalling of malfunction and end of operating life

Low power supply voltage signalling

Additional LED signalling malfunction and end of operating life

Function informing of alarm activation within the last 14 days

Simple installation and operation

Small dimensions, low weight, elegant and durable housing

Very low running costs

B construction mark

National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021

CNBOP-PIB certificate confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021

TÜV Rheinland certificate confirming compliance with the standard EN50291-1:2018

3-year warranty